• Cold Cure 1.5 Qt. Kit
  • Cold Cure 1.5 Pint Kit
  • Cold Cure 1.5 Gallon kit

Cold Cure

$40.75$372.65

Clear
Compare

Description

A two part epoxy coating and laminating resin for use in marine and woodworking applications. Use as a sealer, topcoat, saturation coat, or tie-coat. Cold Cure is a corrosion resistant coating, sealer and laminating resin.

  • Features a convenient 2:1 mixing ratio.
  • A clear, almost water-white, solvent-free epoxy system.
  • Cures to a clear, glossy, blush-free surface.

Cold Cure may be used effectively down to 35ºF in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight. Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has no VOCs. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. Cold Cure is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped.

Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity, moisture tolerant epoxy system. Cold Cure has low odor and no VOC’s. It is non-shrinking, flexible and has excellent resistance to cracking, abrasion, common chemicals and fatigue. Cold Cure is clear and is compatible with most paints and clear finishes. When cured it can be machined, drilled, sanded and tapped. Cold Cure may be used effectively down to 35°F (2°C) in 100% relative humidity. It is an easy to use 2:1 ratio. It will not blush or turn milky in thin films and cures overnight.