PARTALL No. 2

Partall No. 2 mold release paste wax is a soft, easily applied dark green release agent. Partall No. 2 can be used in conjunction with polyvinyl alcohol.

HONEY WAX

Honey Wax is a hard paste wax which will yield a high luster with easy application and exhibits excellent parting. Polyvinyl alcohol cannot be applied over top.

TR HI-TEMP WAX

TR HI-TEMP Wax is a fast drying carnauba-based paste release formulated for heat accelerated applications.

OP600 MOLD RELEASE

OP600 Mold Release is compounded from an imported German wax base, is a fine silicone free paste wax excellent for the preparation of new plugs and molds. It has built-in resistance to high temperatures yet applies more easily than other paste wax mold releases.

POLYVINYL ALCOHOL MOLD RELEASE

Polyvinyl Alcohol Mold Release ( PVA ) has the viscosity of water and can be brushed, wiped or sprayed on and is used in addition to the paste waxes, particularly on intricate surfaces.

POLYESTER PARFILM MOLD RELEASE

Polyester Parfilm Mold Release is a micro-thin, film-forming release agent formulated for polyester resin systems, filled polyester resins and fiberglass reinforced polyester. Its film-forming ability inhibits the migration of the monomer catalyst, impedes the degradation of the mold and yeilds longer mold life. Heat stable to 600 deg. F

CUSTOM 500 WAX

Custom 500 Wax is the finest wax available for protection against the elements of nature. A high 80% carnauba wax content offers  long-lasting protection and also ease of application. Excellent for gelcoat and painted surfaces.