#1 POTTERY PLASTER

No. 1 Pottery Plaster ( Plaster of Paris ) is formulated to provide a stronger, longer lasting mold.  It is mixed at 70 parts water to 100 parts plaster by weight. It is the standard for the industry.

ULTRACAL 30

Ultracal 30 is a gypsum cement which has a high compressive strength and surface hardness. It is mixed at a ration of 38 parts of water to 100 parts of Ultracal 30.

HYDRO-STONE

Hydro-Stone is a gypsum cement that is hard and strong, especially suitable where high strength and resistance to water absorption are necessary. It cannot be worked under a template. Used in high-quality art novelty and statuary castings. Should not be cast in glue molds, but works well in plaster and other flexible molding compounds. It is mixed at a ratio of 32 parts of water to 100 parts of hydro-stone by weight.

HYDROCAL WHITE

Hydrocal White is a gypsum cement with a use consistency of 45 lbs. of water to 100 lbs. of plaster. It can be carved or added to. It has a setting expansion twice that of molding, casting or pottery plaster.

HYDROCAL FGR-95

Hydrocal FGR-95 is a fast-setting, high early-strength product designed for use in casting exterior statuary. It produces strong, hard casts, and, when mixed properly, can be poured into a mold to reproduce many originals. This is an ideal product (when combined with fiberglass mat) for making mother molds. TCS mold-makers are using this almost exclusively for their mother molds.

LABORATORY DENTAL PLASTER
FAST 5 MIN.

KAST KRETE
DECORATIVE CONCRETE