** Bulk pricing available upon request.
** Prices are subject to change without notice.
** All prices are in Canadian funds.
** Applicable taxes are extra.

Please click this link for Color Pigments

WAXED GELCOAT

A surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate.  All Fiber-Tek gelcoats are isophthalic resin based. Stock colors are White, Off White, Gray and Neutral (colorless) and are a brushing viscosity. Custom colors and special matches are available in 22kg minimum order. Requires M.E.K.P catalyst. Click on the link above for part numbers.

UNWAXED GELCOAT

A surface coat providing a cosmetic enhancement and exposure improvements to a fiberglass laminate. Usually used when building a mold as the coating that goes on the mold before the fiberglass laminate is applied. All Fiber-Tek gelcoats are isophthalic resin based. Stock colors are White and Neutral (colorless) and are a brushing viscosity. Custom colors and special matches are available in 22kg   minimum order. Requires M.E.K.P catalyst. Click on the link above for part numbers.

BLACK TOOLING GELCOAT

Black tooling gelcoat is designed to give ultimate strength and cure value to fiberglass mold surfaces.  Tooling gelcoat provides a harder surface enabling it to withstand heat generated from the molding process. Requires M.E.K.P catalyst.

POLYESTER COLOR PIGMENTS

Fiber-Tek polyester color pigments are used for tinting polyester resins and gelcoats. These colors cannot always be successfully together. Stock colors are:
101(White), 105(Gray), 109(Black), 111(Dune Beige), 113(Topaz), 115(Herbs Brown), 117(Chocolate brown), 141(red), 145(Orange), 147(Yellow), 151(Forest Green), 153(Deck Green), 155(Light Green), 161(Royal Blue) and 165(Light Blue). Prices for 500 ml and 1 liter 141 Red are different than shown here. Click on the link above for part numbers and prices.

DURATEC VINYLESTER PRIMER

A high quality primer for composite marine surfaces. Used for one-off and production composite yacht priming and osmosis and blister repairs. Formulated for below waterline and topside and deck applications. It is easily applied with sprayer, roller or brush. High build up to 40 mils, 1000 microns, wet on wet, without sagging on vertical surfaces. Rapid curing - primer will be ready to sand in 1 - 4 hours depending on thickness and temperature. Proven Osmosis and blister resistance on more that 2000 boats and yachts over a 7 year period. Requires M.E.K.P catalyst.

DURATEC EZ SANDING PRIMER

Duratec EZ Sanding Primer is a high quality polyester surface primer that provides outstanding filling and leveling properties for many varied substrates. Excellent adhesion is achieved with fiberglass, metal, wood, pressboard, brick, concrete and polyurethane foam. It offers rapid coat build-up to 50 mils wet on wet for plugs and master mold surfacing; the easily sanded primer cures to a surface that polishes to a high gloss if required. Duratec EZ Sanding Primer adheres to epoxy resins, and with a heat distortion level in excess of 200°F it is an excellent surface for vacuum forming molds.
Requires M.E.K.P catalyst.

DURATEC CLEAR HIGH GLOSS ADDITIVE

Use Duratec Polyester Clear High Gloss Additive to repair clear or pigmented gelcoated FRP parts. The end result is a low porosity, smooth, high gloss, hard surface that is similar to the original gelcoat surface. Duratec Polyester Clear High Gloss Additive also upgrades tooling gelcoats. Used correctly, the additive will reduce subsurface porosity and orange peel, increase impact resistance, improve gloss retention and heat distortion temperatures. Just blend and mix equal parts of Duratec Polyester Clear High Gloss Additive and the gelcoat and catalyze at 2% with MEKP catalyst. Thin 5-15% if necessary to a desired spray viscosity with MEK solvent or a fast acrylic lacquer thinner.
Requires M.E.K.P catalyst.