FILLERS
** Prices are subject to change without notice.
** All prices are in Canadian funds.
** Applicable taxes are extra.

PRODUCT DESCRIPTION COST

CABOSIL

Cabosil is light weight, low density fumed silica powder additive for use in all types of resins and gelcoats although, when used to thicken polyester or vinylester resins, creates an excellent medium sanding, non-slumping compound.
MSDS Sheet

Part no. Size Cost
04019 40 gram 6.95
04020 180 gram 14.20
04021 1.2 kg. 40.50
92013 4.54 kg. 94.70

GLASS BUBBLES

Glass bubbles is a hollow silicone dioxide powder. It is a non-absorbent additive used to extend all types of resins and gelcoats. it can be used in resins alone; however, its main use is to be used in conjunction with other fillers to create easy to sand compounds.
MSDS Sheet

Part no. Size Cost
04013 100 gram 5.75
04014 400 gram 13.30
04015 2 kg. 20.90
92012 15.42 kg. 68.46

INTERFIBE

Interfibe is a treated cellulose fiber and is the replacement filler for asbestos. It is an economical additive for all types of resins and gelcoats to create a hard to sand, gap filling, bedding and filleting compound.
MSDS Sheet

Part no. Size Cost
04001 100 gram 6.40
04002 500 gram 14.10
04003 2.5 kg. 19.25
92010 13.61 kg. 69.80

INDUSTRIAL TALC

Industrial Talc is a magnesium hydroxide powder and is the most economical filler. It is an additive used to thicken all types of resins and gelcoats and is easily applied and sanded.
MSDS Sheet

Part no. Size Cost
04007 450 gram 4.70
04008 1.5 kg. 10.85
04009 10 kg. 19.00
92011 22.68 kg. 28.35

MINI FIBERS

Mini Fibers are dense, ground polyethylene fibers. It is an additive for all types of resins and gelcoats although, when used to thicken epoxy resins, it creates and excellent medium sanding, non-slumping compound.
MSDS Sheet

Part no. Size Cost
04030 100 gram 7.35
04031 450 gram 19.90
92014 4.54 kg. 110.00

1/4" CHOPPED STRAND

Chopped Strand is actual strands of fiberglass chopped into 1/4" lengths. It can be added to any type of resin or gelcoat alone or in combination with other fillers where strength is required.
MSDS Sheet

Part no. Size Cost
04025 450 gram 7.10
04026 1.5 kg. 19.10
92015 per kg.
(23kg box)
6.92

1/8" MILLED FIBERS

Milled Fibers are ground fiberglass fibers. They will add moderate strength to any type of resin or gelcoat alone, or in combination with other fillers.
MSDS Sheet

Part no. Size Cost
04035 250 gram 7.15
04036 1 kg. 19.6
92016 13.6 kg. 138.70

NON SLIP ADDITIVE

Non Slip Additive is a medium grade crushed walnut shell that can be added to any resin, gelcoat or paint to make any area a slip proof surface.

Part no. Size Cost
04045 450 gram 4.95
04046 2.5 kg. 15.35
92017 22.68 kg. bag 54.55

WOOD FLOUR

Wood Flour is a fine sawdust that has been filtered so that there are no surprise lumps to be found. Wood Flour is excellent for creating glues and structural fillers and fillets. It is a fibrous filler that is also thixotropic. To make a smoother fillet add a small amount of Cabosil or Glass Bubbles.

Part no. Size Cost
04050 750 gram 9.80

 

     
 
 
Coast Fiber-Tek Products Ltd.
1306 Boundary Road
Burnaby, B.C. V5K 4T6
Tel: 604-294-8116
Fax: 604-294-8754
 
Visa
Interac
Mastercard

© Copyrite 2000 Coast Fiber-Tek Products Ltd. All rights reserved.